Ballscrew motion - X axis completed

X Axis Ballscrew mounted in support and rails attached.

Underside of X axis.

Completed X Axis with 20mm T-slot Guides for alignment of Extruder / head / etc.

This provides about 32cm of build-bed coverage and only slightly less with a dual extruder design. 

Just managed to also get the Y Axis bed supports drilled, these will allow a flexible build-bed size and an easy way to fix and remove it.

My first bed on this design will be Glass, so I want some replacements to swap-out quickly.

Complete mechanical assembly over the weekend, I will be getting onto the electronics next week hopefully.

Rich.

Ballscrew and motor brackets

Ballscrew and Motor brackets now made.

These will connect the ballscrew to the Y and X stages.

R/H picture shows a NEMA17 motor mount for the X stage.

I will be fitting them later, more photo's if they fit.

Rich.

Goals for RepStrap V2.0 Machine

My Design Aims for the RichRap RepStrap Version 2.0 Machine are - 

• Faster print speed - (This is my main driving factor after having a slow Repstrap for 6 months).
• Change to Ballscrews on X and Y Axis (not sure about Z at the moment).
• Revised Electronics (Mega based - interim version for 2011, until I get my other set finished).
• Integral Electronics Tray and wiring with reliable connectors.
• Change from a fixed to Moving Y bed and print platform.
• Remove the Gantry head arrangement for the Z axis - Need to think of a simple way to do this...
• Simplify the Z axis by using dual Nema 17 motors (I may regret that decision...).
• Increase build-area to 300mm x 450mm x 300mm (Y being easily changed from 100mm upwards).
• Have easy-fit/remove build platform at different sizes and thickness.
• Vertical mount Extruders.
• Dual Extruder ends with remote mounts for Bowden mounted extruders
• Switch to Herringbone Extruder Gears.
• Filament coil store and supply feed for 2 reels built into the machine.
• Heated bed.
• Resistor block Hot-ends.
• Multiple Thermistors / readings.
• Use as many off-the-shelf components as possible.
• Use the off-the-shelf parts to maintain quality and accuracy in the design.
• Do the minimum amount of machining as possible. - But I may do some just for fun as I have a shabby Lathe and Band saw now.
• Where I need to do machining then it needs to be non-critical or easily adjusted to retain quality.

I Intend to be inventive to keep costs down.

* I don't intend to use Belts in this model, but I have a long-term plan for a miniature design using belts instead of Ballscrews maybe directly after this one.

So why don't I just make a Mendel?

 - Well I like the thought of a machine I can build and design myself and I have learnt alot from the first attempt last summer.

And finally it should cost the same to update my RepStrap as it would to make a Mendel, so here we go!

First Z Motor Mount plate (50mm Alu Angle)

First parts of the new X stage, supported with 16mm Linear Bearings and a 30mm x 60mm Aluminum frame that will incorporate the Z vertical movement by using Delrin and leadscrews.

The above plan may sounds like this will be far away from the reprap project goals as it's still using Aluminum and machined components, but I intend that this machine will make it easier for me to develop real self replicating machines in the future. Also Aluminium is 100% recyclable so on that front it's not anti-reprap.

Rich.

The Plan! RepStrap V2.0

I have no machine! it's stripped for a complete makeover...

The RepStrap makeover uses more MCS Aluminium framework.

And Ballscrews for the X and Y Axis.

Z Axis will be Trapezoidal lead-screw or just M8 rod to start with.

I also invested in a Fury3 Chop-Saw for Christmas, this can cut Steel, Aluminium and Wood with one blade - Nice!

Some off-the-shelf Internal R/A fittings and also external brackets will be used this time instead of R/A cut Aluminium.

It's easy to cut, drill and fix together with T-nuts and bolts.

And the last things I printed with Repstrap V1 before taking it apart included a load of Extruder parts, including these nice Herringbone Gears by Rhys Jones -Here > Thingiverse - Rhys Jones Herringbone

Quite a few people have done work on Herringbone gears, Forrest Higgs has a nice post here about them Here > -Forrest Higgs (Herringbone Rack and Pinion) -

Forrest's RepRap Blog is here -http://technocraticanarchist.blogspot.com/ 

These parts will hopefully get me printing again if the V2 RepStrap does not go to plan...

This is the point I should have made a 3D model of my new machine, but I have a whole load of Ideas that may or may not work and I always find it better to evolve as I go.

I'm going to start cutting Aluminium later, hopefully I will have something to post in the next few days, and I'll try to get up a list of what I'm planning to achieve with this new design.

Onwards - >

Rich.

New Tools for Christmas and a start on my RepStrap Overhaul.

Happy New Year Everyone.

I had some new Tools for Christmas and have finished restoring my old Lathe to working order so I'm going to start my planned upgrade of my RepStrap - This time around I'm going to make more notes (Eventually for the Reprap Wiki, I hope) make some design drawings and take lots of Photo's.

BandSaw for Christmas. – Now unpacked and Running.

More Aluminum MCS sections for a new design.

30 x 30mm Alu MCS Frame

30 x 30 and 30 x 60 Brackets.

30 x 60mm Alu MCS Frame

Received a set of Ballscrews and rails for a complete overhaul of my Repstrap, more pictures to follow.

I'm going to strip my current Repstrap later and start the rebuild tomorrow.

Rich.