Thursday, 13 February 2014

2013 review of developments, 3D Printing book release and more challenges.

#2014

I missed doing my annual roundup of 3D Printing adventures before Christmas, so here it is, with some plans and updates for 2014.

Firstly thanks for reading this blog and to all the wonderful people who contacted me in 2013, I believe this year is going to be the best yet for 3D Printing, stay tuned and do get in contact if you have something to share or a project collaboration idea.

To catch up on other things I have done over the years, here are past annual reviews, 2012/11, 2011/10

My 2013 year of 3D printing development started with a pledge to be my year of ‘yes’, wherever possible I planned to say ‘yes’ and get as involved as I could manage (with time available).

This led to trying out many new things including speaking at various shows, festivals, events and even on the BBC website and World Service about 3D printing.

I'm working on new designs, prototypes and ideas. Collaborating with different people and always looking out for other 3D printing projects and experiments too, do keep in contact and let me know what you are up to too.

3D Printing for Dummies -



One of the real highlights of 2013 was the experience of writing a book. It’s always been on my lifetime achievement list, and it feels really good to now be a published Author, I really hope to do more as the experience really was exhilarating from start to finish, something I will never forget.

It was a real privilege to be part of this book, and I was very lucky that my co-author Kalani Kirk Hausman had already put in so much work to get the project off-the-ground with the world famous publishers Wiley – so when the chance to contribute to this project came about it was a very easy ‘yes!’. We had a short timescale for the 300+ Page multi-chapter book, and it had to cover a wide range of 3D printing aspects.  The book covers some of the 30 year history of an already well established additive manufacturing industry, and looks at the current and future uses for this technology.

Many people and fantastic developments have helped to make this book a reality, I want to thank everyone involved in the project and all who kindly allowed images to be used for the book.

You can take a look at the Dummies guide to 3D printing book on Amazon now, it’s available in either print or eBook, and various translations are planned. If you do get a chance to read it, Kirk and I would love to know what you thought.

Another interesting aspect was a flurry of 3D printing writing activity from many different people who contacted me during 2013; asking for image permissions in their own books, some are also now released and some ongoing with releases this year. I’m sure much more will be written on the subject, it’s such an amazing technology that will some day impact and benefit the lives of everyone. I'm sure plenty more will be out soon.

On that note, I also finished reading MAKERS by Cory Doctorow ( @doctorow ) again over Christmas, it's now available for free or donation download in many formats here. A fantastic story (it's fiction, not history, but will be :) for anyone living and breathing the 3Dprinting and the fabulous Maker movement. I highly recommend reading it.

I have not added as much as I wanted to RichRap.com some of this was due to the already heavy level of traffic on it, it’s about to blow another bandwidth limit so at some point this year I will fix that, update and add more tutorials and content. In the mean time I also plan to get shorter but more frequent blog posts up on here, some while I do developments rather than a massive post at the end.

Tiny Printing - 



Printing small was a lot of fun, it taught me a lot about 3D Printing and how best to control plastic extrusion, when to use heat and when to cool, more information here.

RepRap Magazine - 

The RepRap Magazing was launched, this is again another great project by people in the community to document and give a wider voice for all things RepRap. - We would like to do and release more issues in 2014.

3D Printing in NYLON - 



My Nylon printing and colouring experiments attracted a lot of attention, this was a lot of fun and very much still something I continue to experiment with. I plan to do a follow-up article later this year about Nylon, mixed materials and further colour experiments.

3DR –



I have always planned to release a RepRap 3D printer, and after a frantic 5 week development during the earlier part of 2013, I had the first 3DR ready for testing.

For me 3DR has been amazing to watch as it goes out into the world as my take on a 3D printed Delta, watching it then evolve into something much more is great.

Releasing 3DR as an open-source project occupied a lot more time than I had expected last year, but it also led to some really great conversations with people and lots of other great things. You initially think that releasing everything and seeing what people do with it would allow more time to work on other things. That was not the case, it's as much work as if you released it for sale or started a company.

I'm planning to release at least another three machines this year, keep an eye out ;)

For me the starting point into the delta geometry was the Rostock, this was a great printer to build and allowed a lot of experimentation, especially with tall prints that had not been possible before.

Open Hand (and an open heart)- 


The Open Hand project by Joel Gibbard was a fantastic project to see come into life, and with healthy backing the project is well underway.

Joel also won the Venturefest award for best newcomer. Congratulations again, and best wishes from me for the ongoing project.

IndiGoGo perks shipped out and hand-designs well under way.

Shows and Events - 

The London Makerfaire, London 3D printshow and TCT Shows were another great highlight of 2013, we have more great things planned for shows this year, TCT is moving to a 3 Day event and will be bigger and better than ever.

Associations - 

We are starting to see many different 3D printing associations and 'standards' being setup, so I was delighted when the 3D printing association asked me to be a member of the board of advisers, we are aiming to promote, guide and advise as many people as possible with 3D printing and all forms of additive manufacturing.

News and dedicated 3D printing websites boomed in 2013 and will continue to grow and mature with both content and advice. It's almost hard to ignore 3D printing now and it's also very apparent, that many people are starting to be aware this technology is becoming useful for small businesses, and at a justifiable cost level.

My go-to news sites for 3D printing news are the 3DPrintingIndustry who I also try to write interesting articles for as time allows, most recently I posted one on filament recycling (tech for trade).

And another is 3DERS.org - an entire website with news and everything you can imagine to do with 3D printing, it's amazing what and how fast they pick up 3DP news and PR.

Sharing - 

We have also seen sharing sites grow and evolve. There are far too many to mention now, but one I have used and will continue with is the Excellent Youmagine (by the Ultimaker team).

And GitHub, where all sort of cool things happen, all the time :)

Kickstarter and IndieGoGo  both had a huge number of 3D printing and associated projects up for funding.

3D Printing Future - 

As usual time and other work got in the way of all the other things I wanted to experiment with and do, my list of projects and ideas grows bigger every month, but I still managed to design and do a lot of things over Christmas, I'll get up blog posts and images as soon as I can on these and future planned work, if any of you want to collaborate on any projects or innovation, do get in contact.

Lots more to share soon. It's going to be a very interesting year indeed.

Nils posted some great predictions by a few in the 3D printing community, lets see how many happen or disappear.

And for inspiration it's world #InventorsDay - go invent something... anything.

Rich.

24 comments:

  1. Hi Rich, thanks for the mention of YouMagine! Keep up the good work!

    Stay in touch to allow us make it even more awesome for everybody in the 3D printing community!

    Also, good job with the book. I just ordered it from Amazon UK.

    ReplyDelete
    Replies
    1. No problem Erik, as soon as I get some more time I intent to put a lot more of my stuff up on YouMagine. Thanks for making it!

      Delete
  2. Hello Rich, thanks for everything you do for the 3D printing community. You continue to inspire me every day and I look forward what you have to show us in 2014.

    Also can't wait to read the book, my copy is on it's way.

    ReplyDelete
    Replies
    1. Thanks Matthew, I hope you like the book. I have lots planned for this year and will try to blog a lot more too.

      Delete
  3. Well done Rich! You're a star and an inspiration. Thanks for all your hard work promoting DIY 3D printing and open source. Here's to a exciting 2014 :)

    ReplyDelete
    Replies
    1. Thanks Hamish, I'll be at Chelt Geeks next month, hope you can make it, lots to catch up with.

      Delete
  4. Welcome to the club of successful Wiley authors! :)

    ReplyDelete
    Replies
    1. Thanks Jeff, it was an intense and exciting experience, I won't look at a book the same way again :)

      Delete
  5. A Star of Open Hardware and software he is. And A decent blogger to boot. Congrats Rich!

    ReplyDelete
    Replies
    1. Thank you Matthew, much appreciated.

      Delete
  6. Hi Rich,
    Congratulations on the publication! Chuffed with yourself I'm sure and deservedly so. Another great 3d printing year under the belt and even greater to come. Do blog more frequently. It drives thinking and feedback and further innovation, all good. Always enjoy your posts.
    Regards,
    Ivor

    ReplyDelete
    Replies
    1. Thanks Ivor, I will Blog more frequently this year, it's on my list of things to do more of :) and I will be posting to various other sites too, I'll point to them from here at any rate.

      Delete
  7. Hi Rich any change that you will release a version for use with 8mm rods, there a version around on the web, but some have not been tested or have altered other stuff on the base.

    Tried to do it myself with skecthup, but I keep failing to understand how skecthup works.

    ReplyDelete
    Replies
    1. Hi Tom, I don't have a plan for an 8mm 3DR - but I do have other sized planned to show very soon ;) - keep a look out.

      It's worth spending some time with Sketchup, things get easier the more you use it, and having a project or end result is a great focus. Check out some YouTube tutorials and give it another try.

      JEZZMUND posted an 8mm version on Thingiverse here, if you want a starting point - http://www.thingiverse.com/thing:203893

      Delete
  8. Hi Rich
    Nice giraffe you have there sitting in the printer in the background of the books! ;-)
    How did you managed to print it in two colours? Have you changed the filament mid-print?
    Regards,
    Roman

    ReplyDelete
  9. I love reading through your blog, I wanted to leave a little comment to support you and wish you a good continuation. Wish you best of luck for all your best efforts.


    Leaflet Printing Uk & Cheap Flyer Printing Uk

    ReplyDelete
  10. Do your customers pay by Card ? We'll help you find the best Card Payment Service Deal out there... We'll deliver 4 independent quotes so you can compare the best deals of the moment.
    http://www.bestcardterminal.co.uk

    ReplyDelete
  11. It's a very nice idea to describe our talent publicly just want to create a one good blog.i really like your idea.Thanks for sharing this information with me.



    Cheap Leaflet Printing & Printing Business Cards

    ReplyDelete
  12. At present, in the world we have seen various types of 3D printing strategies; the fundamental procedure is comparatively consistent from one to consequent. In additive manufacturing, three-dimensional objects are created from a material in either liquid or particle type. I see that you describe very clearly about 3D printing and 3D printing materials. Thanks for sharing such kind of nice and wonderful collection

    3D printer and printers

    ReplyDelete
  13. I am very enjoyed for this blog. I feel strongly about it and love very important information. The idea of a homemade manufacturer is admittedly returning to the forefront. Like the manner the net leveled the taking part in the sphere, resolution the challenges of reach and sanctioning everybody to play, that’s what's happening with producing nowadays. Click here Best 3D printer manufacturer company in China.

    ReplyDelete
  14. Thanks for sharing information .This is very helpful.
    All Printer Support

    ReplyDelete
  15. This book is very nice and Printing Services fort Lauderdale offer Online Digital printing and Marketing Service around Fort Lauderdale.

    ReplyDelete
  16. 3D printing is quite amazing. My cousin has a laser cutter and that really makes me happy to watch and see what gets created. Printing in a technology that is getting better and better.
    http://www.theprinterclinic.com.au

    ReplyDelete